23
Setting up the network
www.gateway.com
2 On the player’s remote control, press STOP, then press SETUP. The Welcome
to Setup screen appears.
3 Use your remote control’s arrow buttons to highlight Network, then press
ENTER.
4 Highlight Network, then press ENTER to search for an available network.
A list of available networks appears. Names of networks using wireless
access points end with “ACC PT.”
5 Highlight one of the detected networks, then press ENTER. The message
“Joining new network please wait” appears, then the message “Successfully
joined [network name]” appears.
6 Press ENTER to continue. The main Network menu opens.
The IP address appears in the lower-right corner of the screen. To change
the way the IP address is selected, see “Setting the IP address” on page 27.
To change the player name (as it appears to other players), see “Changing
the player name” on page 28.
To Next Page
Loading...