46
Chapter 3: Customizing
www.gateway.com
4 Highlight Others, then press the buttons to select:
■ Bitstream (default)
Outputs digital audio signals from the optical or coaxial digital audio
jacks.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital
audio jacks.
■ Off
Turns off audio output for other formats.
5 Highlight OK, then press ENTER.
Adjusting the speaker balance
This feature adjusts the sound balance of your 5.1-channel speakers system.
To run the speaker test:
1 On the player’s remote control, press STOP, then press SETUP. The main
Setup menu opens.
2 Use your remote control’s arrow buttons to highlight Digital, then press
ENTER. The Digital audio setup menu opens.
3 Highlight More, then press ENTER.
4 Highlight Speaker Test, then press ENTER. A five-second test tone is sent
to each of the six speakers in the following order: Left, Right, Left Surround,
Right Surround, Center, Subwoofer.
To Next Page
Loading...