47
Setting up analog audio
www.gateway.com
5 Adjust the speaker levels on your amplifier as required.
6 Press STOP to cancel the test tone.
Setting up analog audio
The Analog Audio menu lets you set the format of the signal from the
5.1 channel (surround) and 2 channel (stereo) audio jacks.
Configuring Pro Logic virtual surround sound
The player has a built-in Dolby Pro Logic decoder to provide virtual surround
sound for PCM (stereo) from the 5.1-channel analog audio jacks.
To adjust Pro Logic settings:
1 On the player’s remote control, press STOP, then press SETUP. The main
Setup menu opens.
To Next Page
Loading...