Gateway ADC-220 - Navigating the Players Setup Menus; Setting up the Network

20
Chapter 2: Setting Up Your Player
www.gateway.com
6 Go to “Setting up the network” on page 20 to complete the initial setup
of your player.
Navigating the player’s Setup
menus
To navigate the player’s Setup menus, press the following buttons on your
remote control:
Setting up the network
Setting the Network Setup options lets your player connect to your home
network. Choose one of the three setup options depending on your network
configuration:
■ For wired Ethernet setup, see “Wired Ethernet setup” on page 21.
■ For wireless access point setup, see “Wireless access point setup” on
page 22.
Remote Button Function
STOP Press before pressing SETUP.
SETUP Press to open and close the Setup menu.
(up and
down arrows)
Press to highlight options within menus.
(left and
right arrows)
Press to change option settings within menus.
ENTER Press to activate the current selection.
RETURN Press to close the Setup menu.
Tips & Tricks Unless specified otherwise, all buttons mentioned in the
following procedures are buttons on the remote control.