Using your computer - 19
To insert a disc into your computer's optical drive:
1. Press the optical drive’s eject button.
2. When the disc tray slides open, place the disc gently on the tray. Make
sure that the label or title side of the disc is facing upward.
When holding a disc, hold it by the edges to avoid leaving smudges or
fingerprints.
3. Push the tray and it will close automatically or press the eject/load
button.
Taking care of your optical discs
• Keep your disc in its case when not in use to avoid scratches or other
damage. Any kind of dirt or damage can affect the data on the disc,
impair the disc lens reader on the optical drive, or stop the computer
from successfully reading the disc.
• When handling discs, always hold them by the edges to avoid smudges
or fingerprints.
• When cleaning discs, use a clean, dust-free cloth and wipe in a straight
line from the center to the edge. Do not wipe in a circular motion.
• Clean you optical drive periodically with a cleaning kit; cleaning kits may
be purchased at any computer or electronics shop.
To Next Page
Loading...
Need help?
General
