Frequently asked questions - 63
FREQUENTLY ASKED QUESTIONS
The following questions indicate possible situations that may arise during
the use of your computer and each is followed by easy answers and
solutions.
I pressed the power button but the system did not boot up.
Check the LED on the power button.
If the LED is not lit, no power is being applied to the system. Try the
following:
• Check if you properly plugged the power cable into an electrical outlet.
• If you are using a power strip, make sure it is plugged in and turned on.
If the LED is lit, check the following:
• The operating system files may be damaged or missing. Insert the
startup disc you created during Windows setup into the ODD and press
<Ctrl> + <Alt> + <Del> to restart your computer. This will automatically
diagnose your system and make necessary fixes. However, if the
diagnostic utility still reports a problem, then you may have to perform
the recovery process to restore your system to its original default factory
settings.
Nothing appears on the screen.
Your computer's power management function automatically blanks the
screen to save power. Press any key to turn the display back on.
To Next Page
Loading...
Need help?
General
