Gateway KAS-303 - Receiver Utilities; Using the Sleep Timer; Adjusting Display Brightness

62
Chapter 3: Using the Receiver
www.gateway.com
Using the sleep timer
Use the sleep timer to automatically turn the receiver off after a specified period
of time.
. To use the sleep timer:
■ Press the SLEEP button on the remote control to cycle between the
following sleep timer settings:
10, 20, 30, 60, 90, and OFF. The SLEEP light
turns on.
Adjusting the display brightness
You can dim or turn off the receiver’s display.
. To adjust the display brightness:
■ Press the DIMMER button on the remote control to cycle between the
following brightness settings:
ON, dimmer, and OFF.
In the OFF display mode, press any button to restore the display to ON mode.