72
Chapter 5: Maintaining and Troubleshooting Your Receiver
support..gateway.com
Continuous hissing noise during FM reception, especially when a
stereo broadcast is received.
■ Change the position of the antenna.
■ Install an outdoor antenna.
Continuous or intermittent reception, especially at night. hissing noise
during AM
■ Keep the receiver away from noise sources such as, motors, fluorescent
lamps, and lightning.
■ Install an outdoor AM antenna.
Remote control unit does not operate.
■ Replace the batteries.
■ Remove any obstacles blocking the remote sensor.
OSD function is not available
■ Make proper video connections.
Initializing the receiver
If the display or operation of the receiver is not performing correctly, you can
initialize the receiver by performing the following procedure.
Initializing the receiver resets any stored settings back to factory defaults. You
will have to reprogram any custom stored settings.
To initialize the receiver:
1 While in Standby mode, press the SETUP and DECODING buttons at the
same time.
2 After you see the flickering Standby indicator, release the buttons.
To Next Page
Loading...
Need help?
General