GAUI X4 - Rotor Head Assembly

10
GAUI
TAI SHIH HOBBY CORPORATION
Rotor head assembly
旋翼頭總成
GAUI
TAI SHIH HOBBY CORPORATION
Rotor head assembly
旋翼頭總成
螺絲均需上止滑劑
All screws on side plates should
be applied with thread lock.
M3x16
N3X5.5L
M3x16......................x1
N3x5.5L...................x1
螺絲均需上止滑劑
All screws on side plates should
be applied with thread lock.
Mast collar
主軸輪擋
M3x3
M3x3
Lift main shaft before installing the
mast collar on the main mast, then
tighten the mast collar securely.
組裝主軸輪檔時請先將主軸上提至底，
在鎖附M3x3螺絲，套入十字盤總成。
M3x3........................x2
14
15
15
Attention: When assembly is complete,
please re-check for correctness.
注意:組裝完成之部分，零件需自行檢查確認。
Attention: When assembly is complete,
please re-check for correctness.
注意:組裝完成之部分，零件需自行檢查確認。