EasyManua.ls Logo

GB UNI-ALL - Installation and Usage Guides; Correct Positioning and Installation

GB UNI-ALL
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
CORRECT POSITION IN THE VEHICLE GROUP 0+/1
(UP TO MAX. 18 KG)
Always make sure before you purchase the car seat that
it can be correctly fitted in your vehicle. A duly installa-
tion is only given when the ISOFIX and the Top Tether
can be installed correctly in the vehicle.
The car seat can be installed correctly and be used on-
ly in certain makes of car. Please see the details of au-
thorised vehicles and positions in the enclosed typelist
or visit the compatibility check on our homepage:
www.gb-online.com.
In exceptional cases, however, the car seat can be used
on the front passenger seat. In this case, observe the
following points:
• Check whether the passenger seat is fitted with
ISOFIX anchorage points. The car seat may not be
used without ISOFIX.
• Check whether the passenger seat is fitted with Top
Tether anchor points. If the Top Tether can’t be in-
stalled, the car seat may not be used. They usually are
in the back of the vehicle seat itself or behind it.
• Deactivate the passenger airbag. If this is not possible
in your vehicle, use of the car seat on the passenger
seat is prohibited.
• Always comply with the recommendations of the ve-
hicle manufacturer.

Table of Contents