72
PRODUCT CARE
To guarantee that your car seat provides the maximum
protection, it is essential to comply with the following
points:
• All major components of the car seat must be regu-
larly checked for damage. The mechanical parts must
work without problems.
• Make sure that the car seat is not jammed between
hard parts such as the car door, seat rails etc., which
can damage it.
• Avoid getting any dirt or sand in between the seat
shell and the base. This can have a negative impact on
the performance of the recline function. Should this
happen the dirt should be removed to avoid any per-
manent damage of the seat. To do so, remove the seat
from the base.
• The car seat must be tested by the manufacturer if it
was dropped, it experienced an accident or if it had
any kind of direct impairment.
WHAT TO DO AFTER AN ACCIDENT
!
WARNING! An accident may cause damage to the
car seat that is not visible to the naked eye.
Please exchange the seat without fail after an accident.
In case of doubt contact the retailer or manufacturer.
To Next Page
Loading...
