GB UNI-ALL - Removing the Car Seat from the Base; Removing the Base from the Vehicle

52
REMOVING THE CAR SEAT FROM THE BASE
NOTE! To prevent damage to your car and the car seat,
the side protector should be folded back before remov-
ing the car seat (see chapter: ”ADJUSTING THE SIDE
PROTECTORS“).
Press the release button (26) to unlock the car seat
from the base. Tilt the seat a little. The base indicator
shows RED. Now you can release the unlocking button
to lift the car seat o the base.
REMOVING THE BASE FROM THE VEHICLE
Unlock both ISOFIX connectors (4) by pushing the but-
tons (5) and (6) simultaneously and pull them out of
the ISOFIX anchorage points.
Slide the connectors (4) back into the original position.
654
26