56
!
WARNING! Usage of the 5-point belt system is
not permitted for group 2/3!
The Top Tether must be stored in the designated
storage compartment (30).
!
NOTE! When the seat needs to be changed to a
group 0+/1 seat, proceed in precisely the reverse
order.
INSTALLATION OF THE CAR SEAT GROUP 2/3 (15 – 36 KG)
Fold out the support foot (31) which is located under-
neath the car seat. Afterwards place the car seat on a
permitted seat in the vehicle.
NOTE! In group 2/3 the car seat is used without ISOFIX
and Top Tether.
Activate the side protector which is located on the door
side (see chapter: “ADJUSTING THE SIDE PROTECTORS“).
30
31
To Next Page
Loading...
