46
• Place both buckle tongues (22) together and lock
them in place in the belt buckle (20) with an audible
“CLICK”.
• To get the correct tension in the harness system it can
be helpful to first tighten the hipbelt (23) with your
hands. This can be achieved by pulling on the shoul-
der belts.
• After that pull on the central adjustment belt (24) to
tighten shoulder belts (18) until they fit your child’s
body.
NOTE! The harness system is perfectly tensioned when
it is still possible to place a flat hand between the child
and the harness.
NOTE! For the car seat to oer optimum protection,
shoulder belts should fit the body as closely as possible
and the hip belts should run as low as possible so they
are tight against the pelvis.
18
24
23
22
20
To Next Page
Loading...
