GBA Global Bill Acceptors
GBA ST1C Operation Manual
Page 3 of 30
Astrosys International Ltd
GBA ST1C Operations manual V1_4
1.0 INTRODUCTION
This manual describes the operation and maintenance of the GBA ST1C integrated bill validator
and stacker. It is intended to assist the user in the set-up, installation and operation of the
product.
If you have any questions about this or any other Astrosys products then please visit our web sites
at www.globalbillacceptors.com and www.microcoin.com, or contact your regional sales office for
assistance.
The GBA ST1C has been specifically designed for use in Amusement and Vending applications;
however it can also be used in all applications previously served by the GBA vertical stacker range,
including Parking and Internet Kiosks. The following features are also offered:
• Up or Down entry stacking configuration
• “Sense Technology” bill discrimination
• Up to 32 different bills accepted with 4 way insertion
• Accepts bill sizes from 62 to 70mm wide, 120 to 160mm long
• Single Cassette bill capacity option (300)
• Illuminated Bill Entry Bezel
• Tamper-evident, lockable cassette options
• Integrated optical anti-string protection
• Low Power Mode
• Bar code reading option
• USB connectivity and programming option
• Supports multiple interfaces
• Single note escrow
• On board Individual note enable / disable
• Automatic sensor calibration
• On board tri-colour diagnostic LED
• Easy access to note path for cleaning and servicing
• User Support Tools
• CE, UL, C-Tick and ROHS compliant
• Manufactured to ISO 9001 standards
Please note that the words “bill” and “note” are used interchangeably in this document to imply a
single piece of paper currency.
To Next Page
Loading...
