GBA ST1C - Product Information; General Specifications

GBA Global Bill Acceptors GBA ST1C Operation Manual
Page 4 of 30 Astrosys International Ltd
GBA ST1C Operations manual V1_4
2.0 PRODUCT INFORMATION
2.1 General Specifications
Bill Insertion: Up to 32 bill denominations with 4 way insertion
Bill Dimensions: 62 to 70mm wide; 120 to 160 mm long
Bill Acceptance Rate: Greater than 95%
Cycle Time for Validation and Stack: Typically less than 3 seconds
Interface Protocols Supported: Pulse, Parallel, ccTalk
®
(plain & encrypted), bi-
direction serial (“RS232”), NAMA MDB, SSP, VCCS
Power Supply: 12Vdc +/-10% (see section 5.1 Power Requirements
for details of optional power regulator module)
Power Consumption Refer to section 5.1 Power Requirements
Environmental Range
(Operating Temp): 0° to 55°C
(Operating Hum): Up to 90% R.H., non-condensing
(Storage Temp): -10° to 65°C