GCS CYSCAN - Page 3

1CyScan Positioning System • Installation and Maintenance Guide r1.1
GC S
GC S
Contents
Introduction .................................................... 3
CyScan Installation ....................................... 4
Unpacking the CyScan System .................................................................. 4
Mounting the System Components ........................................................... 6
When mounting two CyScan sensors on the same vessel....... 6
Wiring the CyScan System......................................................................... 8
Power Supply Unit (PSU) ................................................................. 8
The Data Converter....................................................................... 10
Notebook computer ...................................................................... 10
Connecting the CyScan Sensor ................................................................ 11
CyScan LED Indicators ............................................................................. 12
Correct startup indication.............................................................. 12
Error states and possible causes ..................................................... 12
Shutdown/suspend ....................................................................... 12
CyScan Removal .......................................... 13
Switching off the CyScan Console System ............................................... 13
Disconnecting the CyScan Sensor ............................................................ 14
Un-mounting the CyScan Sensor ............................................................. 14
Packing the CyScan System ..................................................................... 15
Maintenance and Servicing ....................... 17
Removing and fitting key components ..................................................... 17
Stage 1 - The Rotor Heatshield ...................................................... 17
Stage 2 - The Rotor ....................................................................... 18
Stage 3 - The Body Cover .............................................................. 19
Stage 4 - The Motor Gearbox ........................................................ 20
Stage 5 - The CPU Module ............................................................ 21
Stage 6 - The Controller Board ...................................................... 22
Stage 7 - The Yaw Gyro ................................................................ 23
Stage 8 - The Vertical Reference Unit (VRU) ................................... 24
Stage 9 - The Actuators ................................................................ 25
Cleaning the CyScan Sensor .................................................................... 27
To clean the casing and bellows: ................................................... 27
To clean the optical window: ......................................................... 27
To clean the targets: ...................................................................... 27
Greasing the Gearbox ............................................................................. 27