Simon Security System 15
•Test
•Clock Set
Press the appropriate button.
4. After pressing the appropriate button on the START MENU, the system voice
will prompt you to use the MAIN MENU.
The MAIN MENU includes the following buttons:
•Light Control
• Option #
•Sensor/Remote
• Access Code
Press the appropriate button. Depending on the button you pressed, the system will
prompt you to continue by pressing other buttons on the panel.
Access Codes
Your security system has a master access code and access codes 1-5 used for arming
and disarming the panel. The master code is used for disarming and programming your
system. Access codes 1-5 are generally used for children or as temporary codes for a
baby-sitter or service personnel.
Note
Codes are always needed to
disarm the system. Depend-
ing on the panel configura-
tion, codes may be needed
to arm the system. Check
with the installer for your
system configuration.
Your system may be set up so that the master code or an access code is required when
arming. If so, the panel will prompt you to enter a code when you attempt to arm the
system.
Note
Because different codes can be entered using the same button presses, you have to use
caution when programming different codes. You need to ensure that one access code does
not use the same button presses as other access codes. For example, if the master code is
1234, do not program another code to be 2244. The panel would interpret these codes to be
the same code.
¾How to change an Access Code:
1. Open the cover of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code using the numbered keys.
3. The panel voice prompts you to Please select from START MENU. Press the Add
button on the START MENU.
4. The panel voice prompts you to Select from MAIN MENU. Press the Access
Code button on the MAIN MENU.
5. The panel voice responds with Master Code, press again for next access code,
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to change
press the DONE Button.
6. Enter 3-6 new numbers using the numbered keys. (Access Code length is pro-
grammed by the installer.)
7. Close the panel cover.
¾
How to Delete an Access Code:
Delete Access Code
Delete
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
