GE 040350 - Specifications; Generator Technical Specifications; Engine Technical Specifications

Not for
Reproduction
39
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) to CSA (Canadian Standards Association) standard C22.2
No. 100-4 (motors and generators).
Specications
Generator Specifications
Engine Specifications
10 kW
Rated Maximum Load Current* (at 25°C/77°F, LP)*:
at 240 Volts ....................................................................41.7 Amps
Rated AC Voltage .....................................................120/240 Volts
Phase ................................................................................ Single phase
Rated Frequency ................................................................. 60 Hertz
Generator Breaker ................................................................50 Amp
Normal Operating Range .. -20°F (-28.8°C) to 104°F (40°C)
Output Sound Level 72.3 dB(A) at 23 ft. (7 m) at normal load
Shipping Weight ...................................................... 330 lb (149 kg)
* Natural gas rating will depend on specific fuel but typical derates are between 10 to
20% off the LP gas rating.
8 kW
Rated Maximum Load Current* (at 25°C/77°F, LP)*:
at 240 Volts ....................................................................33.3 Amps
Rated AC Voltage .....................................................120/240 Volts
Phase ................................................................................ Single phase
Rated Frequency ................................................................. 60 Hertz
Generator Breaker ................................................................35 Amp
Normal Operating Range .. -20°F (-28.8°C) to 104°F (40°C)
Output Sound Level 76.8 dB(A) at 23 ft. (7 m) at normal load
Shipping Weight ...................................................... 340 lb (154 kg)
* Natural gas rating will depend on specific fuel but typical derates are between 10 to
20% off the LP gas rating.
Displacement ..............................................................35 ci. (570 cc)
Bore .........................................................................2.83 in. (71.9 mm)
Stroke ..................................................................... 2.76 in. (70.1 mm)
Spark Plug Gap ............................................... 0.020 in. (0.51 mm)
Spark Plug Torque ............................................180 lb-in. (20 Nm)
Armature Air Gap .............0.005 - 0.008 in. (0.13 - 0.20 mm)
Intake Valve Clearance ..0.004 - 0.006 in. (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.004 - 0.006 in. (0.10 - 0.15 mm)
Oil Type ......................................................................5W30 Synthetic
Oil Capacity (with filter) ...........................................57.5 oz. (1.70 L)
Displacement ..............................................................31 ci. (500 cc)
Bore .........................................................................3.56 in. (90.4 mm)
Stroke ..................................................................... 3.06 in. (77.7 mm)
Spark Plug Gap ............................................... 0.020 in. (0.51 mm)
Spark Plug Torque ............................................180 lb-in. (20 Nm)
Armature Air Gap .............0.005 - 0.008 in. (0.13 - 0.20 mm)
Intake Valve Clearance ..0.004 - 0.006 in. (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.004 - 0.006 in. (0.10 - 0.15 mm)
Oil Type ......................................................................5W30 Synthetic
Oil Capacity (with filter) ............................................... 48 oz. (1.42 L)