Need help?Do you have a question about the GE HumiLab and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | HumiLab |
| Category | Portable Generator |
| Language | English |
Provides an overview of installing and setting up the Humilab system.
Details site requirements and initial preparations before installing the instrument.
Lists all items included in the Humilab package for initial setup.
Illustrates the interconnection of the Humilab's components for system setup.
Guides on selecting and preparing the optimal location for the Humilab unit.
Explains the procedure for connecting an optional dry gas supply to the unit.
Details how to make electrical connections to the Humilab unit for operation.
Describes the mechanical connections made to the rear panel of the Humilab.
Outlines the steps for initial system setup and filling the water chamber.
Details the procedure for setting up the chilled mirror sensor for accurate measurements.
Explains how to initialize the dew point sensor after shipment for optimal performance.
Describes the process to clean and rebalance the dew point sensor for accurate operation.
Provides instructions for safely packing and shipping the Humilab unit.
Introduces the basic operation of the Humilab and typical switch settings.
Explains the function of the front panel displays and selector switches for operation.
Details the steps for performing routine calibration of devices using the Humilab.
Describes the typical time it takes for the chamber to stabilize at the set RH point.
Introduces the Prostep software for setting up calibration test profiles.
Lists the necessary computer system characteristics for running Prostep software.
Guides on how to install the Prostep software from the CD-ROM.
Explains how to start and operate the Prostep software for profile creation.
Specifies the required serial port settings for Prostep communication.
Details how to connect the host computer to the Humilab for control and datalogging.
Verifies Prostep communication settings for connecting to the Humilab.
Describes the main screen of Prostep for creating and modifying humidity profiles.
Accesses standard Windows functions for managing Prostep profiles.
Provides a general description of the Humilab's operation and control system.
Explains the divided flow method used by the Humilab for RH generation.
Describes the function and importance of the built-in chilled mirror controller.
Explains the principle of optical condensation hygrometry used in the system.
Provides a general overview of the chilled mirror hygrometer system within the Humilab.
Details the operational theory of the chilled mirror hygrometer system.
Introduces the maintenance and troubleshooting procedures for the Humilab.
Outlines routine checks and maintenance tasks for the system.
Describes procedures to maintain the accuracy of reference measurements.
Covers essential maintenance procedures for the chilled mirror sensor.
Details the steps for cleaning the sensor mirror to ensure accurate readings.
Explains how to balance the sensor optics for optimal performance.
Provides instructions for replacing the sensor mirror in the field.
Discusses the process and requirements for annual recertification of the unit.
Offers diagnostic steps to identify and resolve system issues.
Specifies the operational range for relative humidity measurements.
Details the operational temperature range for the Humilab.
Lists the accuracy specifications for RH and dew point measurements.
Lists the materials used in the construction of the Humilab.
States the water capacity of the Humilab's reservoir.
Provides the dry weight of the Humilab unit.
Introduces detailed information about the Humilab's chilled mirror system.
Outlines the structure and content of Appendix B.
Lists the main components of the Humilab chilled mirror hygrometer system.
Explains the operation and displays on the Humilab's front panel.
Describes the main and control status displays on the front panel.
Details the function and operation of the front panel switches.
Guides on how to use the display switch for system configuration.
Offers a straightforward guide to navigating system option selections.
Provides a detailed explanation of the system's option selection procedures.
Details how to re-program the system using the RS-232 interface.
Accesses various configuration options for the Electronics Module.
Describes how to assign and scale the analog outputs of the system.
Allows adjustment of the balance cycle type and interval.
Customizes the RS-232 data output format and parameters.
Changes the behavior of the front panel display switch for units and scaling.
Configures the data averaging parameter for dew point readings.
Covers procedures for both operator-level and technician-level service.
Provides specific troubleshooting steps for the chilled mirror system.
Introduces information needed to establish RS-232 connections.
Guides on using Windows Terminal to establish RS-232 communication.
Explains RS-232C communication modes: Operate and Reprogramming.
Details the necessary computer hardware and cables for RS-232 connection.
Provides equations and charts for vapor pressure, humidity, and temperature relationships.
Lists and defines the symbols used in humidity calculations.
Presents the formula for saturation vapor pressure with respect to water.
Defines Relative Humidity and Absolute Humidity with their respective formulas.
Refers to a graphical chart for converting water vapor data.
Refers to a psychrometric chart for humidity and temperature analysis.
Outlines the terms and conditions of the manufacturer's warranty.
Describes the buyer's responsibility for filing claims for shipping damage.
Specifies the warranty coverage for repaired equipment.
Details the steps for returning the instrument for service or repair.
To Next Page
