Chapter 3 — Using the PROSTEP software Page 25
Click on the large up and down arrows on the screen to step
through the list of setpoints, and enter the data for each setpoint.
The File menu
The File menu accesses standard Windows functions for:
• creating a new profile
• loading a existing profile
30°C
20°C
40% RH
80% RH
SETPOINT
3
Temp
R.H.
E
A
C
F
D
B
time
A setpoint sequence number
B bath temperature
C an optional delay before the humidity
change is initiated (to allow for temperature
stabilization)
D initial humidity
E final humidity
F duration of the humidity ramp
Figure 9 — A typical setpoint and its values
To Next Page
Loading...
