Page 26 Chapter 3 — Using the PROSTEP software
• saving the current profile
• saving the current profile under a new name or file format
• selecting a folder for holding the profile data or datalog file
• exiting the program
The Run menu
The Run menu contains the following choices:
Run Profile. Runs the profile most recently downloaded to the
Humilab.
Collect data. Collect RH, temperature, and/or DP data for Humi-
Lab operation. (See options > Setup Datalogging Parameters).
Halt Test. Stops running the current profile.
The Options
menu
The Options menu accesses all of the setup and configuration
items:
Scale Graph. Sets the parameters for the main screen profile
display:
• units and maximum/minimum values for humidity and tem-
perature (units set to %RH for typical Humilab profile)
• time scale
To Next Page
Loading...
