GE 27909 - Handset Setup; Anguage; Ring Volume

17
NOTE: During programming, you may press the mute/clear button
at any time to exit the sub-menu and return to the main menu, or
press ash/exit to exit programming and return to standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will
automatically exit programming and return to standby screen.
Handset Setup
1. Make sure your phone is OFF (not in talk mode).
. Press the
menu button to go to the main menu.
. Press
cid/vol (3or4) button to scroll to Setup HS.
4. Press
menu button to conrm and you may program the following items: Ring
Volume, Tones, Auto Talk, Handset Name and Language.
Language
From the Setup HS Menu:
1. Press the
cid/vol (3or4) button to scroll to the Language
sub-menu.
. Press
menu button to enter the menu.
. Use the
cid/vol (3or4) button to select English, Français or Espanol. The default
setting is English.
4. Press the
menu button to save your selection.
Ring Volume
There are 4 volume levels for your selection. They are Volume 1 to  and Ringer off
respectively.
From the Setup HS Menu:
1. Press the
cid/vol (3or4) button to scroll to the Ring Volume sub-menu.
. Press
menu button to enter the menu. Use the cid/vol (3or4) button to scroll to
your selection. The default setting is VOL 3.
. Press the
menu button to save your selection and the screen displays the new
volume setting.
NOTE: Ringer can be disabled by pressing the mute/clear/ringer on/off
button in standby mode, please refer to “Ringer On/Off”.