GE 27909 - Ause in the Ialing Equence; Redial; Diting a Edial; S Equence

6
Inserting a Pause in the Dialing Sequence
Press the #pause button twice to insert a delay in dialing sequence when a pause is
needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to
wait for a computer access tone.) The screen displays a pause as a P, and each pause
counts as one digit in the dialing sequence.
Redial
To quickly redial a number you dialed:
1. Make sure the phone is
OFF (not in talk mode).
. Press the talk/call back
button.
. Press the redial button rst, then use the cid/vol (3or4) button to select the
desired redial number.
NOTE: You may choose from 10 last dialed numbers.
4. Press the menu button. The number dials automatically.
-OR-
1. Make sure the phone is
OFF (not in talk mode).
. Press the
redial button. Then use the cid/vol (3or4) button to select the desired
redial number.
NOTE: You may choose from 10 last dialed numbers.
. Press the talk/call back button. The number dials automatically.
Editing a Redial Record Before Dialing
1. Make sure the phone is OFF (not in talk mode).
. Press the
redial button rst, then use the cid/vol (3or4) button to select the
desired redial number.
. Press the
menu button.
4. Press
cid/vol (- or +) button to scroll to Select.
5. Press the
menu button to enter edit mode.
6. Press
cid/vol (3or4) button to move the cursor forward or backward. Use the
touch-tone pad to add digits or press the mute/clear button to backspace and
delete one digit at a time.
7. After editing, press talk/call back
to dial the modied redial number.