GE 27909 - BS Backlight; Area Code; Dial Mode

0
Area Code
The telephone uses the pre-programmed area code to determine the number format
to display when a valid Caller ID record is received. The pre-programmed area code is
also used for the Dialback feature.
From the Setup BS Menu:
1. Press the
cid/vol (3or4) button to scroll to the Area code sub-menu.
. Press
menu button to enter the menu. The screen displays Enter area code.
. Use the touch-tone pad to enter your -digit area code.
4. Press
menu button to save the setting.
NOTE: If you want to overwrite the Area code, you must delete the
existing one rst.
Dial Mode
From the Setup BS Menu:
1. Press the
cid/vol (3or4) button to scroll to the Dial mode sub-menu.
. Press
menu button to enter the menu and use the cid/vol (3or4) button to
select Tone or Pulse.
. Press
menu button to save your selection.
BS Backlight
From the Setup BS Menu:
1. Press the cid/vol (3or4) button to scroll to the BS Backlight submenu.
. Press
menu button to enter the menu and use the cid/vol (3or4) button to select
On or Off.
. Press
menu button to save your selection.