40
Answering System Remote Access
You can access your answering system from any touch-tone phone by entering your
-digit security code during the playing of outgoing announcement or after you hear
the outgoing announcement.
1. Dial the telephone number to which the answering system is connected.
. Enter the security code during the outgoing announcement or after you
hear the tone.
. Follow the voice menu to use the answering system ’s remote functions.
The remote feature lets you perform the following functions:
To Press this button
Review message 1
Play back messages
Stop message playback
Erase message 0 (during message playback)
Skip message
Turn off/on answerer 4
Review voice menu options 7
Memory Full
When answering system memory is full, the system answers after 10 rings,
announces “Memory full” and waits for you to enter -digit security code. If you don’t
enter the security code within 7 seconds , the phone hangs up.
You should erase some messages so the answering system can record new
messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To
access the answering system, enter your 3-digit security code.
To Next Page
Loading...
