41
Leaving a Memo
This feature lets you record a memo up to minutes long to store as an incoming
message.
1. Press and hold the
memo button
. Begin speaking after it announces “
Record message”.
. Release the
memo button when nished.
Changing the Battery
CAUTION: To reduce the risk of re or personal injury, use
only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH)
battery model 5-2734, that is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.
. Remove the battery compartment door.
. Disconnect the battery plug from the jack inside the battery compartment and
remove the battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge.
Allow the handset
battery to properly charge (for 14 hours) prior to rst use or when you
install a new battery pack. If you do not properly charge the phone, battery
performance will be compromised.
To Next Page
Loading...
