Why won't my GE 400 surface units maintain a boil?
If the surface units on your GE Ranges won't maintain a rolling boil or cooking is too slow, ensure you're using flat pans that match the diameter of the surface unit. In areas with low power voltage, cover the pan with a lid to retain heat.
Why are my cakes lopsided in GE 400?
If your GE Ranges cakes are lopsided or uneven, the unit may not have been properly leveled during installation. Level the oven by referring to the Installation Instructions.
Why doesn't my GE 400 Ranges drawer slide smoothly?
If the drawer on your GE Ranges doesn't slide smoothly or drags, it might be out of alignment. Fully extend the drawer and push it all the way in. See the Care and Cleaning – Exterior Surfaces – Storage Drawer section. Also, the drawer may be overloaded or the load unbalanced; reduce weight and redistribute the contents.
Why won't my GE Ranges storage drawer close?
If your GE Ranges storage drawer won’t close, the power cord might be obstructing it at the lower back of the range. Reposition the drawer and power cord. See the Care and Cleaning – Exterior Surfaces – Storage Drawer section. Also, the rear drawer support might be on top of the guide rail; reposition the drawer. See the Care and Cleaning – Exterior Surfaces – Storage Drawer section.
Why does my new GE Ranges have a strong odor?
If you notice a strong odor from your GE Ranges, it's normal for new ovens due to the insulation. This will disappear after several uses, or you can run a Bake cycle for 20 minutes.
Why do my GE Ranges racks slide out on their own?
If your GE Ranges racks slide in or out on their own, the unit might not have been properly leveled during installation. Level the oven by referring to the Installation Instructions.
General| Self-Cleaning | Yes |
|---|---|
| Number of Burners | 4 |
| Width | 30 inches |
| Oven Type | Conventional |
| Cooktop Material | Glass |
| Color | Black |
To Next Page
