3–16 850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
FRONT CONTROL PANEL INTERFACE CHAPTER 3: INTERFACES
Table 3-6: Settings Save Icon
NOTE:
Do not remove power from the relay whenever the Settings Save icon is ON. When power
is removed the data being saved can also be lost.
Table 3-7: Local Mode Icon
Description
Indicates that a setting is being saved on the relay (i.e., when changing one of relay settings).
Icon is ON (relay is saving to flash memory)
Icon is OFF (relay is not saving to flash memory)
Description
Indicates that Local Mode is active. During Local Mode, the control for the breakers and disconnect
switches can be performed only by the relay front panel.
To Next Page
Loading...
