GE af-600 fp

1.1.5 Abbreviations
Alternating current AC
American wire gauge AWG
Ampere/AMP A
Current limit I
LIM
Degrees Celsius °C
Direct current DC
Drive Control Tool PC Software DCT 10
Drive Dependent D-TYPE
Electro Magnetic Compatibility EMC
Electronic Thermal Overload Elec. OL
Gram g
Hertz Hz
Kilohertz kHz
Meter m
Millihenry Inductance mH
Milliampere mA
Millisecond ms
Minute min
Nanofarad nF
Newton Meters Nm
Nominal motor current I
M,N
Nominal motor frequency f
M,N
Nominal motor power P
M,N
Nominal motor voltage U
M,N
Parameter par.
Protective Extra Low Voltage PELV
Printed Circuit Board PCB
Rated Inverter Output Current I
INV
Revolutions Per Minute RPM
Regenerative terminals Regen
Second s
Synchronous Motor Speed n
s
Torque limit T
LIM
Volts V
1.1.6 Definitions
Drive:
I
DRIVE,MAX
The maximum output current.
I
DRIVE,N
The rated output current supplied by the frequency converter.
U
DRIVE, MAX
The maximum output voltage.
Input:
Control command
You can start and stop the connected motor by means of keypad and the
digital inputs.
Functions are divided into two groups.
Functions in group 1 have higher priority than functions in group 2.
Group 1
Reset, Coasting stop, Reset and Coasting stop, Quick-stop, DC brak-
ing, Stop and the "Off" key.
Group 2
Start, Pulse start, Reversing, Start reversing, Jog and Freeze output
AF-600 FP Design Guide
5
1