Do you have a question about the GE akta start and is the answer not in the manual?
UV Detection Wavelength Range | 190 to 700 nm |
---|---|
pH Detection Range | 2 to 12 |
Computer Interface | USB, Ethernet |
Software | UNICORN |
Weight | 15 kg |
Type | Chromatography system |
Applications | Protein purification |
Conductivity Detection Range | 0.1 to 999.9 mS/cm |
Operating Temperature Range | 4 to 40 °C |
Power Requirements | 100-240 V AC, 50/60 Hz |
Shows the physical layout and identifies key modules of the ÄKTA start system.
Details the four main options available on the ÄKTA start's home screen interface.
Explains the UNICORN start software package for instrument control and method editing.
Highlights critical safety information for operating the instrument.
Step-by-step instructions for preparing the ÄKTA start system.
Guide on connecting the PC and Frac30 to the ÄKTA start instrument.
Procedures for configuring fractionation and calibrating instrument modules.
Instructions for cleaning and filling the system's flow path.
Steps for attaching and connecting a chromatography column.
Methods for applying sample to the column via pump or loop.
Procedures for operating the instrument in a cold room environment.
Workflows for executing chromatography runs using predefined methods.
Workflows for manually controlling and running the system.
Methods for preparing new columns or equilibrating existing ones.
Options for monitoring runs directly on the ÄKTA start display.
How to view and control runs using the UNICORN start software.
Steps to save run results onto a USB memory stick.
How to import run data into UNICORN start for analysis.
Introduction to ready-to-run methods for common purification techniques.
Details and parameters for Affinity Chromatography quick start methods.
Details and parameters for Desalting/Buffer Exchange quick start methods.
Visual representations of system flow paths during various operations.
Accessing help features within the instrument display and UNICORN software.
Information on ordering products and selecting appropriate columns and buffers.
Recommended buffer types and specific suggestions for AC, DS, IEX, and GF.
Information regarding the Health & Safety Declaration Form.
A list of available user documentation for the ÄKTA start system.