Need help?Do you have a question about the GE AKTA pilot 600 and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | AKTA pilot 600 |
| Category | Laboratory Equipment |
| Language | English |
Provides an overview of the user manual's purpose, scope, and typographical conventions.
Covers critical safety information, intended use, and prerequisites for operating the system.
Lists related documentation, including operating instructions, product documentation, and online resources.
Details the instrument's versions, front panel components, and module layout.
Explains the generalized flow path and provides a schematic diagram of its components.
Overviews included and optional accessories, their functions, and usage.
Describes the UNICORN software for system configuration, including its areas and installation.
Details the function, illustration, and sensitivity of external air sensors.
Describes the inlet valves, their illustration, function, and tubing connections.
Explains the two high-precision system pumps, their illustration, and function.
Details the flow restrictor, system pressure sensor, illustration, and function.
Describes the mixer valve and dynamic mixer, their illustration, function, and usage.
Details the air trap valve and air trap, their illustration, function, and indications.
Describes the optional in-line filters, their illustration, function, and air handling.
Explains the column valve, its illustration, function, options, and pressure monitoring.
Details the conductivity monitor, its illustration, function, and types (pre/post-column).
Describes the UV monitor, its illustration, function, protection, and cell sizes.
Details the pH monitor, its illustration, function, pressure, and calibration.
Describes the outlet valves for fractionation and waste handling, their illustration, function, and tubing.
Provides in-depth information on sample application techniques, including background considerations.
Explains fractionation using outlet valves, settings, types, and practical aspects.
Details the Intelligent Packing method for columns, including preparation and packing procedures.
Explains how to use both pumps for higher flow rates in isocratic and gradient applications.
Describes how to adjust and activate pressure control for regulating flow rate and avoiding alarms.
Provides precautions and configurations for running the instrument in cold environments.
Explains the UNICORN Maintenance Manager for tracking system and module maintenance.
Outlines periodic and as-needed maintenance tasks and their recommended intervals.
Provides procedures for cleaning instrument components like conductivity and UV flow cells.
Details calibration procedures for pressure sensors and conductivity monitors using UNICORN software.
Guides on replacing components like pH electrodes, mixer modules, and UV flow cells.
Recommends when to perform system and module performance tests, such as after installation.
Describes the general procedure for running performance tests within UNICORN software.
Explains how to interpret test reports and evaluate the outcome of performance tests.
Provides corrective actions for failures in system leakage tests, including causes and solutions.
Details corrective actions for system backpressure test failures, focusing on obstructions.
Lists corrective actions for failures in system tests, covering gradient, response, and stability checks.
Offers guidance on corrective actions for other module-specific performance test failures.
Lists the internal volumes (in mL) for various modules of the ÄKTA pilot 600 system.
Provides information on how to order spare parts, literature, and contact GE representatives.
To Next Page
