2.4 Instrument Configuration software
Introduction
UNICORN is a common software platform that is used for a range of different products
from GE. The platform functionality is adapted to specific systems by installation of the
Instrument Configuration software provided with the system.
This section gives a brief overview of the function and management of the Instrument
Configuration software. More details are given in the UNICORN Administration and
Technical Manual.
Description
The Instrument Configuration adapts UNICORN functionality to the specific features and
characteristics of the instrument in three areas, as listed in the table below.
DescriptionArea
The software instruction set which controls the instrument.Strategy
The graphic elements which are used to build the Process Pictures
in the Method Editor and System Control modules.
Process
Picture
Predefined phases and methods adapted to the available options
for the specific Instrument Configuration.
Phase Library
Installing the Instrument
Configuration
The Instrument Configuration is installed as part of the procedure to define a system
during UNICORN installation (see the UNICORN Administration and Technical Manual for
detailed instructions.
Updating the Instrument
Configuration
Updated versions of the Instrument Configuration may be released by GE to provide
improved system functionality. Detailed instructions for downloading and importing
updated Instrument Configuration files are given in the UNICORN Administration and
Technical Manual.
ÄKTA pilot 600 User Manual 29274559 AA 27
2 System description
2.4 Instrument Configuration software
To Next Page
Loading...
