GE AKTA pilot 600 - 3.2 Inlet valves

3.2 Inlet valves
Introduction
This section describes the inlet valves that are used to select samples and buffers, for
pump A and pump B respectively, during the chromatography run.
Illustration
The illustration below shows the front of the inlet valve module for pump A.
5
1
4
2 3
DescriptionPart
A1 inlet1
A2 inlet2
A3 inlet3
Outlet, to the right pump head of system pump A4
Outlet, to the left pump head of system pump A5
ÄKTA pilot 600 User Manual 29274559 AA 33
3 Description of modules
3.2 Inlet valves