GE b30 Technical Reference Manual

B30 Patient Monitor
5-6
Document no. 2044677-001
Table 1 Ethernet service data
Value Usage Notes
Received packets (Statistics
In/Packets)
Total number of received packets since
last cold start.
Transmitted packets (Statistics
Out/Packets)
Total number of transmitted packets
since last cold start.
Received bytes (Statistics
In/Bytes)
Total number of received bytes since
last cold start.
Transmitted bytes (Statistics
In/Bytes)
Total number of transmitted bytes since
last cold start.
CRC errors (CRC) Number of received packets with
incorrect checksum.
Frame errors (Frame) Number of received packets with
incorrect frame structure.
Refers to physical layer
problems. An erroneous packet
has often both frame and CRC
errors.
Transmission errors (Transm.) Number or errors in packet
Transmission.
BER errors (BER)
Internal errors (Intern.) Internal error of the network board. Must always be 0.
Missed packets (Missed) Number of received packets lost due to
overload.
Must always be 0.
FIFO errors (FIFO) Internal error of the network board. Must always be 0.
Overrun errors (Overrun) Practically the same as above. Must always be 0.

GE b30 Specifications

General

Model	b30
Manufacturer	GE
Coil Voltage	N/A (Solid State Relay)
Coil Power	N/A (Solid State Relay)
Mechanical Life	N/A (Solid State Relay)
Electrical Life	N/A (Solid State Relay)