GE b30 - Page 64

B30 Patient Monitor
2-3
Document no. 2044677-001
Pole Mount for PSMW - Instructions for installing in horizontal position.
Remove the 2 screws from the clamp, turn the clamp and insert and tighten the screws back.
Fasten the Pole Mount for PSMW with the fastening screw of the clamp and tighten properly to
a horizontal tube or rail with a diameter of 10 mm*25 mm.
Pole Mount for PSMW – Instructions for connecting to monitor
1. Attach the E-PSM(P)W module to the Pole Mount.
2. Connect the cable of the Pole Mount for PSMW to the B30
monitor with the Module Bus adapter for PSMW
(2042772-001).
3. Check the module communication of the E-PSM(P)W
module.