GE BiliSoft Service Manual

34 M1110150 006 © 2007 by General Electric Company. All rights reserved.
Chapter 9: Technical Reference
Large Fiberoptic Light Pad
Effective Surface Area
15cm.
Small Fiberoptic Light Pad
Effective Surface Area
30cm.
25cm.
30cm.
EMC Guidance
Safety Standards: IEC 60601-1, IEC 60601-2-50, EMC Standards IEC 60601-1-2
Table 1
Guidance and manufacturer’s declaration - electromagnetic immunity
The BiliSoft Phototherapy System is intended for use in the electromagnetic environment specied below.
The customer or the user of the BiliSoft Phototherapy System should assure that it is used in such an
environment.
Immunity Test IEC 60601 Test Level Compliance level
Electromagnetic
environment-guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
+/- 6kV contact +/- 8kV
air
+/- 6kV contact
+/- 8kV air
Floors should be wood,
concrete or ceramic tile.
If oors are covered with
synthetic material the
relative humidity should
be at least 30%.
Electrical fast transient/
burst IEC 61000-4-4
+/- 2kV for power supply
lines.
+/- 1kV for input/output
lines.
+/- 2kV for power supply
lines.
+/- 1kV for input/output
lines.
Mains power quality
should be that of a typical
commercial or hospital or
domestic environment.

GE BiliSoft Specifications

General

Brand	GE
Model	BiliSoft
Category	Medical Equipment
Language	English