GE Brivo OEC 865 - Page 187

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 12-9
X-Ray tube
Nominal high voltage
110 kV
Nominal input power
2.2 kW
Maximum anode heat capacity
53 kJ
Target material
Tungsten
Target angle
10°
Small focal spot (IEC336) (Normal Fluoro, High Level
Fluoro, Digital Spot)
0.6×1.4 (IEC336)
Large focal spot (IEC336) (Radiography)
1.4 (IEC336)
Anode
Stationary
Typical filament specification
4.2V, 3.5A
Maximum filament current
4.6A
Permanent Filtration
0.55mm Al @50kV
Weight
0.65 kg
Manufacturer and model
LOHMANN, 110/3DF;
Hangzhou Kailong Medical
Instruments Co., Ltd.,
KL188SBR-0.6/1.2-125
Maximum voltage between anode and ground
55kV
Maximum voltage between cathode and ground
-55kV
X-Ray radiation angle
10 degree
Bracket (between the tube assembly and the collimator)
Filter
0.8 mm Al
Collimator
Filtration
0 mm Al
Input power
DC 5V, 1W
Electrical connection mode
through 3mm, 12pins connector
Mechanical connection mode
cast aluminum bracket, screw fitting
• Iris collimator
Fluoroscopy:
Nominal diameter: 23/15/11cm (9”/6”/4.5”)
X-Ray beam continuously adjustable to an area of less than 5×5 cm at the image receptor
Film: