GE Brivo OEC 865 - Workstation Brakes

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 3-9
3.2.9. Workstation Brakes
Brivo OEC 715/785 Workstation provides wheel brakes. Pressing the wheel brakes allows you to lock the
brakes and prevent the Workstation from moving.
Unlock the brakes by pressing down the wheel brakes again.
Brivo OEC 865 Workstation provides brake pedal located on the left side of the Workstation. It has three
positions that control wheel movement. The pedal positions are:
1. The wheels close to the pedal roll in a straight line, and the wheels opposite pivot freely. Place the brake
pedal this position to move the Workstation long distances.
2. Allows all the wheels to pivot freely. Place the brake pedal in this position to easily maneuver the
Workstation during final positioning.
3. Prevents Workstation from moving.