Introduction
2002938-002E Cardiolab® II Plus Amplifier Manual 1-3
Intended Use
The CardioLab II Plus Amplifier is intended for use in an
electrophysiological catheter laboratory or catheterization laboratory
where ECG, direct cardiac, intracardiac and pressure signals need to be
recorded from a patient. This device is intended for use under the direct
supervision of a licensed health care practitioner.
Chapter Content
This manual is organized into the following chapters:
1. Introduction: Describes the manual contents and provides
general information about safety precautions, service requirements,
equipment symbols and serial number identification.
2. Equipment Overview: Gives a description of the equipment and
components.
3. Operation: Describes how to connect and disconnect cables to the
amplifier and provides a list of related user’s manuals and update
guides. Describes the stimulator bypass connections for emergency
pacing.
Appendix A: Maintenance and Troubleshooting: Describes how
to maintain the equipment and keep it in good working order with a
recommended maintenance schedule, cleaning guidelines, checkout
procedure, and safety tests.
Appendix B: Technical Information: Provides a complete table of
technical specifications for the CardioLab II Plus Amplifier.
Related Manuals
Below are a list of the related manuals.
Part Number Document
2027332-100 Mac-Lab Operator’s Manual
2027332-101 Cardiolab Operator’s Manual
2027332-102 Centricity Cardiology INW Operator’s Manual
2027332-103 Mac-Lab/Cardiolab System Security Guide
To Next Page
Loading...
