GE Cardiolab II Plus - Cardiolab II Plus Catheter Input Module

2-18 Cardiolab® II Plus Amplifier Manual 2002938-002E
Equipment Overview
CardioLab II Plus Catheter Input Module
The equivalent to the Stimulus Inputs 1-4 on the Stimulator Input Cable
are labelled on the CardioLab II Amplifier as Stimulus Inputs A1, A2, B1
and B2.
The four stimulus inputs on the Stimulator Input Cable (see photo
below) connect to the stimulator.
Each Catheter Input Module is broken down into two groups of 16 poles
each. For example, Block A is broken into A (1-16) and A (17-32).
Each pacing channel, requires one positive and one negative pole. In
order to maximize the number of pacing channels, only one positive and
one negative designation should be made for each group.
For detailed instructions on how to designate pacing channels and enable
pacing for particular sites, refer to the on-line help in the software
application.