7-2 170 Series Monitor Revision C
2000947-004
Serviceable Assemblies: General Anti-Static Handling Precautions
General Anti-Static Handling Precautions
The following guidelines should be followed when handling circuit boards or
assemblies containing circuit boards. Following these procedures helps resist
damage that can be caused by static electricity.
Discharge any static charge you may have built up before handling parts.
Wear a grounded, anti-static wristband at all times.
Use a static-free work surface.
Store items in anti-static bags or boxes.
Do not remove items from anti-static containers until needed.
To Next Page
Loading...
