To Next Page
D
Donna ParsonsAug 17, 2025
Why is internal pressure not measuring correctly on GE Measuring Instruments?
- MMelissa BurtonAug 18, 2025
If the internal pressure isn't measuring correctly on your GE Measuring Instruments, be sure the transducer is securely attached to the monitor. Check for air bubbles or blockages in the dome or catheter and flush if necessary; replace the dome if it's cracked. Adjust the strain gauge height and replace the catheter if needed. Calibrate the catheter or strain gauge. The problem could be due to a poorly connected transducer, air bubbles, a cracked dome, incorrect strain gauge height, a displaced catheter, or a need for calibration.
General
