GE Corometrics 172 - Tocotransducer, Ultrasound Transducer, and Legplate

Revision D 170 Series Monitor 8-3
2003023-001
Cleaning: Tocotransducer, Ultrasound Transducer, and Legplate
Tocotransducer, Ultrasound Transducer, and
Legplate
CAUTIONS
ABRASION—Do not use abrasive cloth, sharp objects, or
abrasive cleaners.
ALCOHOL—Do not use Alcohol in cleaning solutions.
DISCONNECTION—Detach the transducers/cables/legplate
from the monitor.
IMMERSION—Do not immerse transducers/cables/legplate or
hold under running water.
1. Dampen a cloth or paper towel with one of the following products; then wring
out until only slightly wet:
 Sodium Hypochlorite 5.25 % (Bleach) diluted 10:1
 Cidex
 Sporicidin
 Soap and water
2. Rub soiled area until clean, taking care not to excessively wet the
tocotransducer diaphragm seal or the contact surface of the ultrasound
transducer.
3. Use a cloth dampened with water on the contact surface of the ultrasound
transducer and around the seal of the tocotransducer. Do not use a sharp object
which might damage the seal of the tocotransducer.
4. Dry all accessories with a soft, dry cloth.