GE CS5500

Event message Explanation
PA Panic Alarm
A personal attack alarm has been tripped.
Panic Keypad
A panic alarm generated by pressing the keys
7
and
9
on the keypad.
Partarm
See Partial Arm event message.
Partial Arm
Part arm of the system by a specific user.
Recent Closing An alarm occurred within five minutes of the panel being armed.
Re-exit
A special feature of false alarm preventing.
Reset
A user has manually reset a smoke detector.
RF Jam Restore See RF Jammed event message.
RF Jammed
RF jamming.
RF Low Battery
An RF transmitter has reported a low battery.
RF Low Battery
Restore
See RF Low Battery event message.
Service End End of the ‘Installer on-site’ (service mode).
Service Start
Start of the ‘Installer on-site’ (service mode).
Silent Panic
A silent panic alarm.
Siren Tamper A siren tamper.
Siren Tamper
Restore
See Siren Tamper event message.
Start Download
The start of an up/download.
Start Prog
Start programming. The installer entered programming mode.
Tamper A tamper.
Tamper Restore
See Tamper event message.
Telephone Fault
Telephone line faults.
Telephone Fault
Restore
See Telephone Fault event message.
Trouble A trouble condition.
Trouble Restore
See Trouble event message.
Walktest
The start/end of a walktest.
Zone Inactive
Restore
See Zone Inactivity event message.
Zone Inactivity A zone inactivity monitoring event.