GE eBike - B-2.1 Overview: Disassembling the Ebike Basic;Comfort

- 14 - eBike, eBike L, eBike EL 2018112-003 Rev J
B: Mechanical Design
B-2.1 Overview: Disassembling the eBike basic/comfort
We recommend using the following tools to disassemble the device:
Flat bladed screwdrivers: Philips screwdrivers:
1 pc. 1.0 x 0.18 1 pc. PH 1
1 pc. 4.0 x 0.8 1 pc. PH 2
1 pc. 6.0 x 1.2 1 pc. PH 3
Fork wrenches: Allan keys:
1 pc. 5.5 mm 1 pc. 2.5 mm straight
2 pc. 7 mm 1 pc. 3 mm straight and elbow
1 pc. 13 mm 1 pc. 4 mm straight and elbow
1 pc. 17 mm 1 pc. 5 mm straight
1 pc. 19 mm 1 pc. 6 mm straight and elbow
Socket wrenches : Pliers
1 pc. 5.5 mm 1 pc. side cutter
1 pc. 13 mm 1 pc. flat nose pliers
1 pc. multigrip pliers
Special tools
1 pc. crank extractor
2 pc. round pin, max. 3 mm, minimum length 15 mm
NOTE: Use the same tools to disassemble eBike L and eBike EL. Two wide metal angles may be required to
remove the ergometer casing (side length approx. 1.5 cm x 15 cm).