GE eBike - Appendix B.2: Spare Parts; Service Kits for Ebike L; Ebike el

- 90 - eBike, eBike L, eBike EL 2018112-003 Rev J
Appendix B.2: Spare Parts eBike L / eBike EL
Part No. Short Description Description
2017911-036 ERGOMETER EBIKE L&EL BP ADD-ON KIT Service Kit: Retrofit Kit Blood Pressure Module Basic for eBike L / EL
comprising:
1x PCB BP for control terminal incl.
1 x cable connecting to PCB BP with
1 x fastening socket, self-adhesive
1 x cable tie, 95 mm
1 x silicone tubing to pressure sensor, 110 mm
1x silicone tubing, 60 mm
1 x fastening socket, self-adhesive
1 x cable tie, 95 mm
1x tubing joint, straight, 4.0 mm / 1.5 mm
1x tubing joint, KU straight, GS 4
4x washer U3.2, plastic (spare for terminal)
4x screw M3.8 (spare for terminal)
4x screw M3x12 (spare for terminal)
2x screw M4x 10 for terminal (spares)
1x BP module (pump unit), preassembled
4x spacer pin M4x 5
4x washer 4.3x12x1
4x nut M4
1 x cable tie, 95 mm
2x cuff connection angle 50x30x3, preassembled with
2x tube coupling for connector panel
2x silicone tubing, 550 mm
1x cable microphone basic, part 2, with all accessories
2x cable tie, 3.5 mm, width 180 mm
1x silicone tubing, 670 mm
4x washer Z4.3x8x0.5
4x screw M4 x 10
4x adhesive clamp for tubing, aluminum
1 x cable tie, 95 mm
1x connecting piece KU TS4 (spare)
1x BP cuff shackle, standard, 130 cm tubing
1x Addendum for BP Module retrofit kit
2017911-043 ERGOMETER EBIKE L&EL EXT TRMNL BP ADD-ON KIT Service Kit: Retrofit Kit Blood Pressure Module External for eBike L / EL
comprising:
1x PCB BP for control terminal incl.
1 x cable connecting to PCB BP with
1 x fastening socket, self-adhesive
1 x cable tie, 95 mm
1 x silicone tubing to pressure sensor, 110 mm
1x silicone tubing, 60 mm
1 x fastening socket, self-adhesive
1 x cable tie, 95 mm
1x tubing joint, straight, 4.0 mm / 1.5 mm
1x tubing joint, KU straight, GS 4
4x washer U3.2, plastic (spare for terminal)
4x screw M3.8 (spare for terminal)
4x screw M3x12 (spare for terminal)
2x screw M4x 10 for terminal (spares)
1x BP module (pump unit), preassembled
4x spacer pin M4x 5
4x washer 4.3x12x1
4x nut M4
1 x cable tie, 95 mm
2x cuff connection angle 50x30x3, preassembled with
2x tube coupling for connector panel
1x silicone tubing, 550 mm
4x washer Z4.3x8x0.5
4x screw M4 x 10
4x adhesive clamp for tubing, aluminum
1 x cable tie, 95 mm
1x connecting piece KU TS4 (spare)
1x BP cuff shackle, standard, 130 cm tubing
1x Addendum for BP Module retrofit kit
Appendix B.2: Spare Parts / Service Kits for eBike L / eBike EL