GE eBike - Page 88

- 82 - eBike, eBike L, eBike EL 2018112-003 Rev J
Part No. Short Description Description
Appendix B: Spare Parts
2018111-012 SPARE EBIKE/C SADDLE MOTOR Service Kit: saddle motor eBike comfort, consisting of:
1x saddle motor, pre-assembled
1x shoulder bolt M8x25
1x washer U 8.4x16x1.6
1x nut M8, self-locking
1x washer U10.5x20x2
2018111-013 SPARE EBIKE/C SADDLE GUIDE Service Kit: saddle guide eBike comfort, consisting of:
1x plate with threaded bushing, rear 54x35x8 mm
1x clamping block POM 35x35x8mm
1x nut M10
2x screw M5x16, galvanized
1x setscrew M10x20 with hexagon socket and flat point
2018111-014 SPARE EBIKE/C SADDLE HOST Service Kit: saddle host eBike comfort, kit consisting of:
1x saddle host with motor 55x55x75
1x straight pin, diam. 10x36
2x screw M6x16
2018111-015 SPARE EBIKE/B COVER TOP GREY cover, top (grey) for eBike basic
2018111-016 SPARE EBIKE/C COVER TOP BLUE cover, top (GE blue) for eBike comfort
2018111-017 SPARE EBIKE/B COVER SET R/L Service Kit: casing eBike basic (GE), kit consisting of:
1x side panel eBike basic, left, with silk-screened GE logo
1x side panel eBike basic, right, with silk-screened GE logo
2x connection piece, diam. 10, length 100 mm
10x washer U4.3x9x0.8
4x screw M4x12 cyl.
2x screw M4x30 cyl.
4x screw M4x10, combi-slotted
2x screw M4x25 cyl.
1x threaded rod M4, length 325 mm, galvanized, blue
2x hex nut M4, self-locking Cleveloc
1x cap D: 22.6, white
1x adhesive label 80x35
2x plastic wheel diam. 80 mm with slot
2x spring washer w/o. cap diam. 12x28 mm, galvanized, white
2x cap for plastic wheels
2x lock washer diam. 9 mm
2 x adhesive label roll 80x35 silver
1x adhesive label roll ø25 silver