2018112-003 Rev J eBike, eBike L, eBike EL - 85 -
2018111-139 SPARE EBIKE DRIVE UNIT EXCHANGE/2 Service Kit: drive unit, replacement, for eBike, consisting of:
1x drive unit, replacement, assembled
6x screw M8x20
6x star washer 8.4x15x0.8
2018111-032 SPARE EBIKE STRAIN GAUGE Service Kit: Strain gauge, kit consisting of:
1x strain gauge, pre-assembled for drive unit eBike
1x clamping plate
2x star washer F3.2
2x screw M3x10
1x micro rope, short, diam. 0.81 mm 7x7, length 88.7 mm, for eBike
2018111-033 SPARE EBIKE RETURN SPRING Service Kit: return spring with micro rope, consisting of:
1x return spring with micro rope, diam. 0.6 mm 1x19, length 125 mm
1x clamping plate
2x star washer F3.2
2x screw M3x8
2018111-140 SPARE EBIKE PCB RPM2 Service Kit: PCB RPM, fully equipped for eBike
1x PCB RPM
1x spacer pin M3, length 12 mm
2x star washer F3.2
2x screw M3x8
1x addendum for PCB RPM 2
Power supply eBike:
2018111-141 SPARE EBIKE POWER SUPPLY/3 Service Kit: power supply module for eBike, kit consisting of:
1xpower supply 24V, 2.5A, 60VA, 50/60 Hz, preassembled on sheet panel
1x interface cable connecting to power supply
1x cable connecting the power supply to the power switch
4x screw M4x12
2x star washer, diam. 4.3 mm
1x hex nut M4
1x washer, diam. 4.3 x 12 x 1
2x microfuse 1.25A, slow-blow
1x sticker with fuse and power ratings (narrow)
1x sticker with fuse and power ratings (wide)
1x addendum for power supply
2018111-036 SPARE EBIKE EARTH CABLE Service Kit: earth cable, kit consisting of:
1x earth cable, 1.5 mm2, 100 mm
2x disk Z4.3x8x0.5 inside
1x hex nut M4
1x washer, diam. 4.3 x 12 x 1
Part No. Short Description Description
Appendix B: Spare Parts
To Next Page
Loading...
