About this manual
This manual has been developed to provide the user with the information necessary to operate and maintain the enFlow IV uid/blood warming system. It
is important that all medical personnel that operate this device read and understand all the information contained within this System Manual. This material
is not meant as a substitute for formal training in the use of intravenous delivery systems, which may be required by local, regional or state protocol. As
with any medical device, please consult your local medical director or governing agency for further information and requirements. If you have questions or
concerns regarding this manual or product, please contact Customer Service or Technical Support for assistance:
Customer Service
E-mail: gmb-medspec-custservice@carefusion.com
Phone: 1.800.323.9088, option 1
Technical Support
Phone: 1.973.956.5431
Manufactured for
Vital Signs, Inc. a GE Healthcare Company
20 Campus Road
Totowa, New Jersey 07512, USA
EC RE P
GE Medical Systems SCS
283 rue de la Miniere,
78530 Buc, France
© 2015 General Electric Company – All rights reserved. All specications subject to change without notice. GE, GE Monogram, and Vital Signs are trademarks
of General Electric Company. * enFlow is a trademark of General Electric Company Enginivity, LLC., a subsidiary of Vital Signs, Inc. Vital Signs, Inc., a General
Electric company, doing business as GE Healthcare.
4400-0024-EN Rev A
To Next Page
Loading...
